WEEDO X40 IDEX 3D Printer
The Printing Process, Weedo X40 Idex 3D Printer, Child Safety Lock, Auto Leveling, A 3D Printing Model, 3D Printed Objects, Supports 1.75Mm Filament Pla, Virtually No Temperature Variations, Low Power Consumption
Results of our analysis:
We analyzed 57,099 reviews for 193 products in the 3D Printers category.
We analyzed a total of 36 reviews for this product. Of these, 15 reviews were recent.
Around 50% of reviews were positive and about 47% were negative.
7.51 out of 10, based on these 8 factors:
What buyers say about WEEDO X40 IDEX 3D Printer
Also need to raise the heat a little higher than the filament asks for. I did a long print with PETG and it did great, but I was a little afraid to do it for a long period of time.
I waited 3 weeks to finish reviewing the printer so I could get some use out of it. I have used it for multiple hours, and there have been no issues so far.
The slicer is still useful, but it is a bit outdated, and you can always use another slicer.
The bed is very comfortable and heats up nicely, although I would imagine the whole fan shroud would need to be changed since it seems like a custom design.
Since you can't order parts off of Weedos website it's hard to find replacement parts, the Z, E0 and E1 are A4988 and this is not the case as it the Z, E0 and E1 are silent drivers.
What is the diameter of the default nozzles?
To improve the printing speed, 0.6mm or 0.8mm nozzles can be changed on the weedo x40
Can they be upgraded to all metal or are they all metal already?
The default nozzle can be heated to 260 degrees, but the metal nozzle needs to be updated to print with 300 degrees.
Can you tell me when this will be available in Canada?
Currently it is not available in Canada, but will be available soon.
Does anyone know what the brand of filament is that comes with the X40?
Any brand of PLA can be used on weedo X40, the brand in our package is WEEDO.
I want to get rid of a lot of test prints on the x40, is there a way to do that?
You can take down the WIFICAM module and get the TF card, use the TF card reader and format the card to clean-up the mess.