ANYCUBIC 3D Printer Resin
High Precision, The Lcd Dlp Sls 3D Printing, Rapid Photopolymer, Led Lcd Dlp Sls 3D Printing, The 3D Printer, Anycubic 3D Printer Resin
What We Like
- Comes with low shrinkage during the photocuring process that ensures the high precision and smooth surface
- Developed to reduce the forming time with its extraordinary fluidity
- Features a good combination of hardness and toughness that makes it easy to remove
- may not work with DLP printers
Results of our analysis:
We analyzed 8,088 reviews for 46 products in the 3D Printing Liquid category.
We then analyzed 511 reviews for this product. Of these, 20 reviews were recent.
Around 83% of reviews were positive and about 12% were negative.
9.81 out of 10, based on these factors:
What buyers say about ANYCUBIC 3D Printer Resin
The printed parts have shown to be quite resistant, considering the stress and abuse they suffer on an RC that goes 25+ mph, I used this resins for the purpose., I used this for the purpose, the printed parts have shown to be quite resistant, considering the stress and abuse they suffer
I anticipated that it would be strong when it was sitting in the vat and I took the lid off the printer, but it hasn't been enough to cause any headaches.
I think it's a good thing that this stuff is printed in a great printer, because I can barely smell the resin after it's poured into the vat.
I purchased this type of printer because it was the one that came out top in the reviews, and I'm going to order more now because of the performance and results.
The prints were so good that at 40m, I could see the lines in the small print that I took pictures of.
Where can I find a material safety data sheet?
I tried to get one but they are not available, so I won't be buying this again.
How much can be printed on one bottle?
It is possible to get a good idea of how much resin is being used with your slicing software. For example, I will be going through 487ml in a single print, it is 2 parts printed solid, but your average miniature is only about 3.5ml so about 143 minatures
I can't find the castable one on Amazon.
There is a search for castable resin IFUN Jewelry Casting Resin for LCD 3D Printer Lost Wax Casting UV-Curing Resin 405nm Photosensitive Liquid Yellow 500ml on Amazon.
Is it possible to use another type of resin with the printer, or only the resin that comes with the printer?
If you have any questions about the machine and the resin, please contact us by the service card address and we have professional engineers to follow your help ticket within 24 hours.
Is it possible to pour it into a mold and cure it with a lamp?
After the resin of the outer layer is cured, the light transmittance reduced, so the resin inside cannot be cured.