ANYCUBIC 3D Printer Resin
Lcd 3D Printing, Anycubic 3D Printer Resin, The Same High Quality 3D Printer Resin, Low Shrinkage & High Precision, The Sla Uv Curing Resin, The 3D Printer Printing, A Better Print Quality
What We Like
- Prints the models with low shrinkage during the photocuring process, which ensures high precision and smooth surface.
- Developed to reduce the forming time with its extraordinary fluidity
- Comes with a good combination of hardness and toughness that makes it easy to remove
- may not work on DLP printers
Results of our analysis:
We analyzed 8,088 reviews for 46 products in the 3D Printing Liquid category.
We then analyzed 112 reviews for this product. Of these, 6 reviews were recent.
Around 74% of reviews were positive and about 21% were negative.
9.20 out of 10, based on these factors:
What buyers say about ANYCUBIC 3D Printer Resin
The printed parts have shown to be quite resistant, considering the stress and abuse they suffer on an RC that goes 25+ mph, and packaging is great, you can easily re-use over and over.
I have been using this printer resin to make some of my own magic, and it has been working wonders! I have been using it to make some of my own magic, and it has been working wonders! I simply poured this into little pots, and I have been using it to make
If you spray the print with clear coat after washing and curing it, it can become crystal clear.
I looked down and it didn't break, it was a solid and rounded design, which I have been using for a long time, and which I think has me sold to continue to use this as my go-to!
The quality of prints I can get is amazing and it cleans up very easily with IPA, I recommend anyone who owns a printer to try the Anycubic resin, it's becoming my go to.
Where can I find a material safety data sheet?
I tried to get one but they are not available, so I won't be buying this again.
How much can be printed on one bottle?
It is possible to get a good idea of how much resin is being used with your slicing software. For example, I will be going through 487ml in a single print, it is 2 parts printed solid, but your average miniature is only about 3.5ml so about 143 minatures
I can't find the castable one on Amazon.
There is a search for castable resin IFUN Jewelry Casting Resin for LCD 3D Printer Lost Wax Casting UV-Curing Resin 405nm Photosensitive Liquid Yellow 500ml on Amazon.
Is it possible to use another type of resin with the printer, or only the resin that comes with the printer?
If you have any questions about the machine and the resin, please contact us by the service card address and we have professional engineers to follow your help ticket within 24 hours.
Is it possible to pour it into a mold and cure it with a lamp?
After the resin of the outer layer is cured, the light transmittance reduced, so the resin inside cannot be cured.