NOVA3D 3D Printer Resin 405nm LCD Rapid Resin Standard Photopolymer Resin
More Function, Low Odor Nova3D Photopolymer 3D Resin Specially Formualated, Plastic Free 3D Printing, Nova3D 3D Printer Resin, Your 3D Printing, Format Lcd Rapid Resin Standard Photopolymer Resin
What We Like
- Lower Odor NOVA3D photopolymer 3d resin specially formulated to decrease the smell
- Designed to significantly reduce printing time with its excellent fluidity
- UV curing 3d resin high quality pigments inside makes the print works show bright and stunning color effect
- may produce yellow tint for some
Results of our analysis:
We analyzed 7,088 reviews for 46 products in the 3D Printing Liquid category.
We analyzed a total of 95 reviews for this product. Of these, 2 reviews were recent.
Around 85% of reviews were positive and about 12% were negative.
9.45 out of 10, based on these 7 factors:
What buyers say about NOVA3D 3D Printer Resin 405nm LCD Rapid Resin Standard Photopolymer Resin
I have been using Jasco denatured alcohol, which is cheap, and it has had no issues, and it feels similar to polycarbonate for some reason.
We have had no warping or visible shrinkage since we used the setting shown in the attached photos, and we also have grey that I have not tried before, we would like to try the other resins offered by NOVA3D.
The lid takes away 99% of the smell when it is put on. Its very runny which is a good thing and can flow into the FEP spaces during lift very quickly.
I like the way it looks, but I am not sure if it is strong enough to hold onto tiny objects that can break off easily.
I love the blue being so rich and deeper in color than other blue resins, and I printed this panther on a 3D printer using support settings from "3D Printing Pro."
Does the white stay white after it cures?
It takes on a dark brown tone when cured under a UV light, and it doesn't stay clear like the manufacturer says.
What are the best print settings for rapid resin?
The better bottom exposure time is 25-30s, normal exporsure time is 6-8s, and the thickness of layer is 0.05mm.
Is it easy to color this resin?
If it doesn't already have a pigment then it should be colored with resin dyes.
Is this resin good enough to make large prints in my Phrozen Transform?
It can work with more of a printer's type, but further print setting need to be adjusted by the printer setting.
Is it castable?
No, you should look for a castable resin under sarya tec.